The uniform paving effect of Asphalt Distributor stems from the collaborative operation of precise structural design and intelligent control technology. As the core guarantee for stable performance, the Asphalt Distributor is equipped with a high-precision spraying system. Its nozzles are arranged at equal intervals, and the flow rate of each nozzle is strictly calibrated to ensure the exact same amount of asphalt sprayed per unit time, thus avoiding local over-spraying or under-spraying.
The traveling system and spraying system of the Asphalt Distributor are linked through an electronic control system. The traveling speed can be steplessly adjusted, and the spreading volume parameters can be preset according to engineering requirements. When the equipment travels at a constant speed, the control system real-time regulates the nozzle switching frequency and the output pressure of the asphalt pump, enabling asphalt to form a uniform oil film thickness on the road surface. Meanwhile, the built-in mixing device continuously stirs asphalt at a constant temperature, preventing uneven spreading caused by local solidification or stratification of asphalt.
In addition, advanced Asphalt Distributor is equipped with ultrasonic thickness detection sensors, which can real-time monitor the asphalt spreading thickness on the road surface and feed data back to the control system for automatic fine-tuning of spreading parameters. Pre-operation pavement pretreatment inspection, equipment parameter calibration, and constant-speed driving during operation further ensure the uniformity of asphalt paving, providing stable support for the construction quality of road engineering.
