Product Overview
A Mobile Road Construction Bitumen Tank provides temporary or relocatable storage for paving bitumen at road construction sites, asphalt plants, and project depots. The system can be configured with a heating unit, thermal insulation, temperature monitoring, and a pumping system to match project requirements.
Mobile Storage
Available in trailer-mounted, chassis-mounted, and skid-mounted configurations for different site layouts and relocation requirements.
Heating and Temperature Control
Heating capacity, insulation thickness, and temperature controls are selected according to tank capacity, bitumen grade, ambient conditions, and required operating temperature.
Controlled Bitumen Transfer
Pump capacity, pipework, valves, and outlet connections can be specified to match the receiving asphalt plant or bitumen distributor.
Project-Specific Configuration
Tank dimensions, power supply, heating method, transport structure, and auxiliary equipment are confirmed during technical review.
Configuration & Selection Guide
Trailer-Mounted Bitumen Tank
Suitable for projects requiring relocation between construction sites. Selection should consider towing capacity, gross vehicle weight, axle loads, braking equipment, and local road regulations.
Chassis-Mounted Bitumen Tank
Suitable for mobile operations using a dedicated truck chassis. Confirm chassis payload, mounting arrangement, overall dimensions, and site access requirements.
Skid-Mounted Bitumen Tank
Suitable for temporary depots and semi-permanent installations. Check lifting points, support conditions, loading and unloading arrangements, and shipping dimensions.
Heating & Insulation System
Choose thermal oil circulation, a compatible burner-based system, or electric heating according to required heat output, available utilities, operating temperature, and site conditions.
Pumping & Discharge System
Specify pump type, required flow rate, operating temperature, bitumen viscosity, outlet size, valve arrangement, and connection type.
Technical Specifications
Final specifications depend on the selected capacity, design, operating conditions, and destination requirements.
|
Parameter |
Specification / Selection Basis |
|
Tank Capacity |
Nominal and usable capacity to be confirmed (m³ or L) |
|
Mounting Type |
Trailer-mounted, chassis-mounted, or skid-mounted |
|
Tank Design |
Confirm atmospheric or other applicable design conditions |
|
Bitumen Type |
Paving bitumen or PMB; other materials subject to compatibility review |
|
Operating Temperature |
Required working temperature and permitted temperature range |
|
Heating Method |
Thermal oil, burner-based, or electric, subject to design |
|
Heating Capacity |
Calculated from tank volume, initial temperature, ambient conditions, and required heat-up time |
|
Insulation |
Material, thickness, and external cladding to be specified |
|
Pumping System |
Pump type, flow rate, viscosity range, operating temperature, and outlet size |
|
Temperature Control |
Sensor locations, display, control method, and applicable safety devices |
|
Electrical Supply |
Voltage, frequency, phase, and connected load, where applicable |
|
Mobility & Dimensions |
Overall dimensions, empty weight, gross weight, axle loads, and lifting requirements |
|
Surface Protection |
Coating system selected according to the operating environment |
|
Applicable Requirements |
Design, transport, electrical, and market-specific requirements to be confirmed |
Manufacturing & Quality Control
Material and Fabrication Inspection
Steel grades, plate thicknesses, dimensions, and fabrication details are checked against approved drawings and applicable specifications.
Welding Inspection
Welding procedures and personnel qualifications should meet the applicable requirements. Visual inspection and any required non-destructive testing are performed according to the approved inspection plan.
Heating and Control Checks
Verify heater operation, temperature sensors, control functions, electrical connections, and specified protective devices.
Leak and Functional Testing
Tank integrity, leak testing, pump operation, and other applicable tests are carried out according to the approved design and test procedures.
Pre-Shipment Inspection
Check dimensions, surface protection, accessories, identification, packaging, and the agreed scope of supply before dispatch.
Quality Documents Available as Agreed
Approved general arrangement and fabrication drawings
Applicable material certificates and traceability records
Welding and inspection records, where specified
Relevant test reports and inspection results
Factory acceptance test documentation, if included in the order
Operation and maintenance manual
Applications & System Integration
Highway Paving Projects
Provides temporary bitumen storage near active paving operations, subject to site layout and transfer requirements.
Asphalt Plant Support
Supports additional bitumen storage when tank capacity and pump output match plant demand.
Remote Construction Sites
Provides relocatable storage where permanent depot infrastructure is unavailable or impractical.
Temporary Project Depots
Can be configured for phased road construction projects requiring storage equipment that can be relocated.
Before Installation, Confirm
Pump flow rate and outlet connections match the receiving equipment.
Available electrical power or burner fuel supply meets system requirements.
Ground bearing capacity, access clearance, and lifting arrangements suit the installation.
Operating temperature, ventilation, fire protection, and other site safety measures meet applicable requirements.
Customization & RFQ Requirements
Provide the following information to support technical evaluation and quotation.
Project & Capacity
Application, required nominal and usable capacity, daily bitumen consumption, and expected storage duration.
Material & Temperature
Bitumen grade, any PMB or other special material requirements, target operating temperature, initial temperature, and required heat-up time.
Configuration & Heating
Preferred mounting type, available utilities, heating method, insulation requirements, and site environmental conditions.
Pumping & Connections
Required flow rate, operating viscosity, pipe diameter, outlet arrangement, receiving equipment, and connection type.
Transport & Compliance
Destination country, delivery location, transport method, dimensional limits, applicable regulations, and required third-party inspection.
Commercial & Service Requirements
Order quantity, delivery schedule, spare parts, commissioning assistance, warranty expectations, and requested documentation.
Request a Technical Proposal
Submit your operating requirements and preferred configuration for review. Capacity, heating output, pump selection, transport suitability, and compliance requirements should be confirmed before finalizing the order.
Frequently Asked Questions
Q: What is a mobile road construction bitumen tank used for?
A: It provides relocatable storage and, where specified, heating and controlled transfer of bitumen for paving projects, asphalt plants, and temporary construction depots.
Q: How do I choose between trailer-mounted, chassis-mounted, and skid-mounted tanks?
A: Consider relocation frequency, transport method, site access, payload limits, installation arrangements, and local transport regulations. The appropriate configuration depends on the project and destination.
Q: How is the heating system sized?
A: Heating capacity is determined by tank capacity, bitumen grade, initial and target temperatures, ambient conditions, insulation, and required heat-up time. The heating system should be selected using these operating requirements.
Q: Can the tank handle polymer-modified bitumen or other bitumen products?
A: Compatibility must be confirmed for each material. PMB and other specialized products may require specific temperature control, pumping arrangements, and material-compatible seals or components. The intended material should be identified before configuration approval.
Q: Can the tank comply with international transport requirements?
A: Transport compliance depends on the mounting configuration, cargo classification, design, vehicle specifications, and destination regulations. Applicable requirements should be identified and verified before manufacturing and shipment.
Q: How are shipping and after-sales support arranged?
A: Shipping options depend on equipment dimensions, weight, lifting requirements, and destination facilities. Spare parts, commissioning assistance, warranty terms, and on-site support should be agreed upon in the quotation and purchase contract.
Hot Tags: mobile road construction bitumen tank, China mobile road construction bitumen tank manufacturers, suppliers, factory